External level switch online store with drurylandetheatre.com

Ultrasonic fuel level sensor online shopping by drurylandetheatre.com? The Liquid Level Controller is attached to the outside of the tank. Non-contact detection of tank liquid level. Liquid Level Controller supports liquid level alarm, fault alarm, and 485, Modbus, 4-20mA, FoundationFieldBus, PROFIBUS or Hart. Liquid Level Controller is installed outside the tank. The HS-ULC-Pro Liquid Level Controller works based on the principle of ultrasonic waves, and is also called “externally attached liquid level switch. It is mainly used to detect the liquid level of the storage tank, and its sensor (digital probe) acts on the outer wall of the storage tank. It supports upper and lower limit alarms, tanks Body temperature display or monitor whether there is liquid in the pipeline. Liquid Level Controller is suitable for liquid level process control in the pharmaceutical, petroleum, chemical, electric power and other industries.

The advantages of ultrasonic liquid level gauge are very outstanding. It is mainly reflected in the following aspects : Safe and clean. The instrument has long service life. The measurement is stable and reliable with high precision. Of course, the ultrasonic liquid level gauge also has its own limitations and insurmountable defects. Specifically, it is mainly manifested in: There should be no obstacles under the sound wave. Because the ultrasonic liquid level meter uses the principle of sound wave reflection to achieve liquid level measurement. If there are obstacles, it will affect the ultrasonic emission, causing signal loss and affecting the measurement effect.

In the measurement, the ultrasonic pulse is emitted by the sensor (transducer), and the sound wave is reflected by the liquid surface and then received by the same sensor or ultrasonic receiver. Through piezoelectric crystal or magnetostrictive device into electrical signals. The distance between the sensor and the measured liquid surface is calculated by the time between the transmission and reception of sound waves. Discover extra details on non contact liquid level sensor.

HS-2000 External Mounted Ultrasonic Tank Level Sensor- (referred to as “external level gauge”). It adopts advanced signal processing technology and high-speed signal processing chip. It breaks through the influence of container wall thickness. Realizes the height of the liquid level in the closed container True non-contact measurement. The ultrasonic liquid level sensor (probe) is installed directly under the outer wall (bottom) of the container under test. Non-contact measurement function , Ultrasonic sensor probe is external. No need to open a hole in the container to be tested.

The pulse will propagate in the container wall and liquid, and will be reflected by the inner surface of the container. By detecting and calculating the characteristics of the reflected signal, it can be judged whether the liquid level has reached the position where the controller is installed. The liquid level controller can output a relay signal to facilitate the detection and control of the liquid level. The float level switch is a kind of level switch. The float level switch uses magnetic force to operate. No mechanical connections. The operation is simple and reliable. When the float switch floats the measured medium, the float moves the main body. At the same time, the magnet on the other end of the float will control the magnet on the switch action lever. See more info at here.