Monthly Archive September 2019

Turkish traditional handmade snack box online shopping

Many individuals are working far away from their countries and they would like to have things to remember them about their home country.For all turkish people around the world there is this family that ships traditional handmade food , with authentic taste, or handmade turkish crafts to anyone anywhere in the world. Would you like to taste an authentic assorted baklava? Gourmeturca is like a family you left behind and that will send you a nice wrapped box with something good your grandma did for you.

Every turk deserves a family in Turkey even if he lives far away and he doesn’t has anyone left in Turkey. It must feel lonely without your home rituals, traditions and culture right ? The people at Gourmeturca want to be like a family to you. Do you want something from Turkey that you can’t find where you live now? Tell them and they will search for it in Turkey and find it for you. They won’t send you garbage or poor quality stuff, they will only send you things that they would gift to their family. You are in their family now.

A list of Turkish sweets and desserts would not be complete without the king of them all, which is baklava. Made from a simple combination of crispy filo pastry, chopped nuts and soaked in a sweet, sticky syrup, baklava is ideal as either a dessert or sweet snack. Sometimes served with a healthy dose of ice cream, the variety of nuts used differs from region to region. Gaziantep, a South-eastern province is famous for their use of pistachio nuts and production of what many say is the best Turkish baklava in the country.

Gourmeturca.com Motto: Always best. Always fast. We never ship something that a family member wouldn’t send their folks. When someone needs something from Turkey, we act like a family member of them. We find whatever they need, we ship wherever they are. With the best way and the fast way. Get your pistachio sultan baklava from us today!

Cezili Sucuk and Pestil: This is a unique and delicious dessert that is fun to eat and fun to make! Dried fruits and walnuts are laced on a string and dipped in thick, unsweetened grape must (the squished grape juice that still includes skins and pulp). These strings are then left to dry in the sun. They often look like candles or a sausage due to the grape must’s opaque finish. Revani: Known by many names in various countries, this sweet cake made from semolina and soaked in syrup is a favorite among Turkish cuisine lovers. Orange flower water is often added. Chopped pistachios top this dessert for a rich finish.

We do not just sell products. We are sending the hospitality, flavors, culture of Anatolia to different places all over the world. So we are culture ambassadors. We get excited every day when we are going to office just to know how many people from different countries we will reach at the day. Our priority is to make you happy. And don’t forget we offer a $25 discount on your first order!

FAYA International and Electronic Commerce Inc.
gourmeturca.com
Turkey Head Office : Barbaros Mahallesi Karanfil Sokagi Varyap Meridian A Blok Villa 1, 34746 Atasehir/Istanbul
United States Office : 17702 Mitchell North, Irvine, CA 92614
Whatsapp: +905318190048
Phone: +902162323030

Tree services guides

Searching for the best options if you need to cut down the tree maintenance costs? Start with picking the right trees for Colorado! Native Americans and early settlers in the west used the ripened seed pods of this beautiful tree as a substitute for coffee. The Nursery Staff loves it for its beauty and resilience. Kentucky Coffee Trees have a slow-to-moderate growth rate. They can reach up to 50 feet tall and 40 feet wide. Their size isn’t their only striking feature. The leaves of Kentucky Coffee trees are show stoppers! Each of the two-foot-long leaf segments consists of several lance-shaped leaflets off to each side. The effect is stunning and looks quite tropical! As an added bonus, the leaves turn bright yellow in the fall. The fragrant early summer white flowers may be hidden by the dense foliage, but they mature into beautiful seed pods as summer fades. You guessed it: the large pods make for great winter interest!

Trees don’t need humans to grow. Most trees thrive where they are planted, but humans sometimes inadvertently damage the trees they’re hoping to showcase. Just parking a car underneath a tree regularly can damage the tree by tamping down the ground too hard, making it difficult for the roots to grow and shift in the soil. Many times, homeowners want to build a structure near or around a beautiful tree to have the tree enhance the final construction project. Don’t do it! When construction is too close to trees it can damage their roots and growth space. Roots need two to three times the length of branches to grow enough to support a tree. Be sure to discuss what your trees need with a contractor, and mark off places where you don’t want construction vehicles to drive or park.

Do you want to keep your trees safe? First we will write some tips on tree care and after that we will introduce Tree Artisans, a tree services company in Colorado Springs. If your area constantly deals with drought you will want to consider trees listed as drought-tolerant. Some drought-tolerant species include Arizona Cypress, Japanese Zelkova, White Fir, and Kentucky Coffeetree. On the opposite side of the spectrum if your area deals with a large amount of moisture or wet conditions, here are a few trees that will do better in wet conditions: Baldcypress, Shellbark Hickory, Red Maple, Silver Maple, Paper Birch, River Birch, and Weeping Willow.

Tree owners often need to move or transplant trees from a nursery or within the yard. Yard trees may have been planted too thickly or threaten to outgrow available space. Size is a critical factor in transplanting. The larger a tree, the more difficult it is to transplant. Before starting a mulching project, become familiar the critical root zone (CRZ) or tree protection zone. This zone is generally defined as the area under a tree and out to its dripline. Improving conditions in this protection zone will also result in major health benefits to a tree. The selection of trees for gardens and public landscaping should be made responsibly. The climatic particularities in Colorado make some trees better to be planted than others. Besides resistance to local weather conditions, other tree planting considerations must include the growth rate, the form of the trees and their size at maturity, as well as pest resistance and maintenance issues. Read more info on Tree removal Colorado Springs.

Europe tour

Expats stories to choose the top travel destinations in Europe. Longing for a shower is common to many people. That Ulysses really existed – this is unknown. But his return home is told by Homer as a wandering, being an important cultural treasure left new heritage from antiquity. Perhaps this is the expression of a healthy skepticism, opposed to the longing and euphoria of traveling. Many shades of longing: Columbus, Marco Polo or Amerigo Vespucci, Vasco da Gama, Magellan, Alexander von Humboldt – they were all explorers who traveled on a mission or were driven by their thirst for knowledge and who did great service to mankind.

Lucerne – Pilatus: Mount Pilatus is one of the most legendary mountain massif located in Lucerne, Switzerland. A massif is a mountain made of several peaks rather than one zenith. To reach the top consider a ride along the Pilatus Railway, which is the steepest cogwheel railway on the planet. Madrid – Plaza Mayor: The Plaza Mayor was built in the 15th century in the center of Madrid, Spain. Today the central plaza with its Baroque architecture is highly popular among tourists and shoppers alike.

Palace of Versailles – Versailles, France: This royal chateau is located in Versailles in the Ile-de-France region and the palace is sometimes referred to simply as ‘Versailles’. Versailles was just a small village community when the palace was built in the 11th-century, unlike the thriving, affluent town it has become. From 1682, it was the seat of political power for the Kingdom of France. Louis Le Vaue was the architect responsible for the expansion of the palace from 1661 under the orders of Louis XIV. This building has been part of many significant historical events throughout French history. The palace is now only used as a museum and has become one of the most popular tourist attractions in France.

Expats in Europe tip of the day : Prepare to laugh at yourself. A lot. This is key. Insane things happen, and a lot of it you may never understand. True story: while trying to say “pineapple” to a coworker, you might instead say “I love your mom.” Everyone will laugh, and you should too. Let it go and grow. Also, don’t try to have relations with your coworker’s mom; it’s a bad idea. Read extra details at WBTEurope.

Join the locals. Try to learn as much about the culture as possible. One of the best ways to do this is to go to the events that the locals attend. They will typically be centered around a holiday or celebration and give you great insight into what the tradition is all about. Not only will it be informative, but a great way to meet new people.

How to eliminate whiteheads?

Don’t forget about the beauty sleep! You may find the expression “beauty sleep” exaggerated, but know that it is not so. Very little stress and sleep increase the production of sebum from the skin, which, in combination with dust and dirt, blocks the respiration of the pores and thus the pimples appear. So sleep 8 hours a night and, if you can, at least 30 minutes at lunch.

It is recommended to avoid aggressive towel-mediated exfoliation. It may seem like a good idea for a freshly washed, moistened and soaked skin to be rubbed, but stop! Don’t try this at home. You will do nothing but harm. There are dermatocosmetic products specially designed for this purpose, products that have gentle action and that not only gently exfoliates but also cleanses. If you start to rub your face with a towel, sponge or body gloves, the lesions will become more inflamed. After washing, the face should be gently wiped, using tampon movements, always using a clean towel. Dirty or used towels for several days in a row attract bacteria and promote their proliferation. If they are then put in contact with the face, the results are disastrous, especially if we consider that most forms of acne are caused precisely by the presence of bacteria on the surface of the skin. See extra info on https://cystic-pimples.com/what-are-blackheads-and-how-to-remove-blackheads/.

People suffering from acne should avoid as much as possible the use of cosmetics for hair, especially fixative spray, gels, paints. Even if they are on the hair, they can easily come in contact with the face, irritating the skin. The shampoo and conditioner used should be as delicate as possible, not containing strong chemicals. Oily hair can influence the turn or complexion, so it is best to wash it as often (every two days), especially during acne blemishes. If you have long hair, try to hold it so that it does not come on the face.

Many experts believe that the idea that chocolate and chips stimulate the appearance of pimples is just a myth. Even so, it is much better to avoid them and replace them with products that have shown beneficial effects on the skin (and skin in general). High-fat foods, fast food products and any other foods lacking in nutritional principles should be eliminated. Fresh fruits and vegetables, but also whole grains are among the products that should not be missing from the diet. See extra details at https://cystic-pimples.com/how-to-remove-whiteheads-acne/.

Don’t overdry the affected area. It’s not the chemical you use; it’s the amount you use, says Neal Schultz, M.D., a Manhattan derm. “People think if a little salicylic or glycolic acid is good, more is better,” he says. “It gets to the point that the active ingredient irritates the skin, making it scaly and flaky and red.” To prevent irritation, try a lower concentration of active ingredient once you’ve already broken out. Dr. Zeichner recommends checking your label for a concentration of benzoyl peroxide around 2.5 percent. One that really works: Paula’s Choice Clear Regular Strength Daily Skin Clearing Treatment ($17).

The Baebody retinol moisturizer uses active retinol to fight some of the most common signs of aging. This cream can be used all over the face, including around the eye area, and also on the neck. It helps to decrease the appearance of fine lines and wrinkles. It also works to plump the skin making it look youthful and fresh. This moisturizer from Baebody is made with 71% organic ingredients. It contains plant derived hyaluronic acid, green tea, vitamin E, and other beneficial ingredients. This unique formula can help reduce the appearance of age spots and other types of discoloration.

Benzoyl peroxide attacks the P. acnes bacteria. However, one of its main side effects is dryness: If you’re going to use anything with benzoyl peroxide, make sure to moisturize afterwards. Sulfur and azelaic acid are less common and less severe alternatives to benzoyl peroxide. Dr. Peter Lio, assistant professor of clinical dermatology at Northwestern University, says sulfur-based treatments are “a good fit for patients who can’t tolerate the side effects of benzoyl peroxide.” See more info on https://cystic-pimples.com/cystic-acne-a-guide-to-treating-cystic-pimples/.

Stem cell treatment center

Did you know that stem cells, unlike other cells in the body, continue to divide for long periods of time and can help strengthen the immune system, effectively fighting infections and pathogens from the external environment. In addition, stem cells in the placenta and umbilical cord are important sources of platelets and red cells, which carry oxygen and nutrients to the blood. Stem cell harvesting can be done regardless of the time of birth: vaginal birth, caesarean section, multiple birth, premature birth or water birth.

Physiotherapy can be defined as a treatment method that focuses on the science of movement and helps people to restore, maintain and maximize their physical strength, function, motion and overall well-being by addressing the underlying physical issues. Neuro Physiotherapy is a type of rehabilitation offering examination and treatment of the physical problems that are caused by an individual’s neurological condition (stroke, spinal cord injury, traumatic brain injury, cerebral palsy, etc) and aims at enhancing and maximizing their functional ability. See more info Cerebral Palsy Physiotherapy

Occupational therapists evaluate a child’s needs by testing his or her fine motor skills, perception and oral motor skills. By observing how the child responds to touch and movements, the therapist can determine a treatment plan. The treatment plan typically involves positioning, reaching, grasping and releasing. These skills are important for a child to develop the ability to be independent. Occupational therapy for children usually involves a form of play to keep them motivated. Many children with cerebral palsy have sensory impairments that make movement difficult. Our senses help us recognize changes in temperature, feel pain and to be aware of the space around us. Senses, such as touch and balance, are important for motor skills like picking up objects and walking.

euroGen Brain & Spine Institute commenced on 17th December 2008. From treating around 150 patients in the initial year we have steadily reached a point to where we treat approximately 250 patients in a month. We have not only expanded from a small facility to an 11 storey building, in a beautiful, homely, locality, but also grown in terms of manpower and resources. We began as a team of 6 professionals in the year 2008 but have now expanded to a larger family consisting of almost 200 inhouse and outsourced employees. The entire set up of the hospital has been designed to be patient centric. Read extra info on NeuroGen Brain and Spine Institute.

A few advices to help your child with autism: Pay attention to your child’s sensory sensitivities. Many children with ASD are hypersensitive to light, sound, touch, taste, and smell. Some children with autism are “under-sensitive” to sensory stimuli. Figure out what sights, sounds, smells, movements, and tactile sensations trigger your kid’s “bad” or disruptive behaviors and what elicits a positive response. What does your child find stressful? Calming? Uncomfortable? Enjoyable? If you understand what affects your child, you’ll be better at troubleshooting problems, preventing situations that cause difficulties, and creating successful experiences.

What are the symptoms of a spinal cord injury? Some symptoms of a spinal cord injury include: problems walking, loss of control of the bladder or bowels, inability to move the arms or legs, feelings of spreading numbness or tingling in the extremities, unconsciousness, headache, pain, pressure, and stiffness in the back or neck area, signs of shock, unnatural positioning of the head. Source: https://www.neurogenbsi.com

Brea refrigerator repair

If the refrigerator does not work or the light inside the refrigerator, check if the power supply is ok. Specifically, insert something else into that socket where the refrigerator is and see if it works.

Here’s how often you should clean the fridge, what you should focus on and what are the main steps: DAILY: wipe the shelves. Whether it is a bottle that has not been properly sealed or an unsealed bag whose contents have been spilled, the shelves must be cleaned as soon as possible. Various leaks and sticky spots can promote the appearance of bacteria or mold, so it’s good to clean them as soon as you notice them. WEEKLY: Throw away leftovers, vegetables, fruits and expired food. A slice of pizza left over from your last party with friends or a salad you didn’t finish at the last meal are leftovers that, even if stored in the fridge, don’t last too long. As well as fruits or vegetables: check them weekly and throw out those that show signs that they are about to break down. Looking for Santa Ana refrigerator repair services ? We recommend see DNVappliance now!

Tip of the day: The most important factor in deciding on a new fridge is determining what size will fit in your kitchen. Refrigerators are usually listed by their internal capacity in cubic feet, but it’s more important to focus on the external dimensions—and width is usually the limiting factor. Here’s how to measure for various scenarios. Replacing your current fridge? You’ll need to buy a new one of very similar width. Measure your current machine’s width, depth (from the wall to the front face), and height. This will focus your search more than any other step you can take.

As the name suggests, a bottom-mount fridge is just like a top-mount fridge, with the obvious exception being that the freezer compartment is at the bottom. That’s all there is to it. Generally speaking these models are less common, which means less variety/range, and as mentioned earlier, they tend to be less efficient or more expensive than a top freezer model, meaning they could cost you more to run in the long term. Though, that’s not to suggest that all models are bunk. Bottom-mount fridges: Can be more expensive but you pay for energy-efficiency, Less variety and range than the top-mount types, Freezer on bottom for easier access to fridge section.

San Blas sailing and other adventure travel top locations

Panama adventure travel tours are a trendy thing to do right now. Few locations include Singayta, Ecological community in which you can hike, horseback riding, cycling and rowing boats. The journey begins in the traditional village, passing through the rainforest and mangroves. Observe the flora and fauna of the area and witnessed the singing of hundreds of migratory birds.Matanche Beach, Bay where along its 7 km of fine sand can practice water sports such as sailing, jet-skiing, diving, volleyball and beach football. Something also interest in the area is the variety of restaurants offering fish and tossed the famous banana bread.

Although it’s not on most travelers’ itineraries, Punta Chame is home to one of the nicest beaches in Panama and it’s also the best place for kiteboarding in the country. Set on a peninsula jutting out into the Pacific Ocean, this area is literally all about the beach. The endless stretch of beach here is wide, and the water is warm and shallow, giving kiters who are learning the distinct advantage of being able to stand up in the water to collect themselves as they work with their kite. The winds are side on shore and quite consistent from December to April, which is Panama’s dry season. Several kite schools offer lessons, including Machete Kite and Kitesurf Panama, located at opposite ends of the beach.

The Pacific Coast of Mexico has been a great place for sport fishing and certainly in San Blas you can live a great adventure and find a variety of fish such as Dorado, Sailfish and Marlin, as well as Mojarra, Pargo, Sierra and Snook, depending on the season. Be sure to visit the famous International Tournament Sailfish, Marlin and Dorado which is held every year during the months of May and June.

Arriving at your first destination you will be greeted by a tropical palm-fringed island paradise and calm waters with various shades of blue and green inviting you to dive in and play with the multitude of colorful fish surrounding you, while snorkeling on the sunken shipwreck reef located close to the beach. You will have plenty of time to relax in the shade of a palm tree, to explore the island, to meet the amazing Kuna population or to bath in the crystal clear ocean, surrounding yourself with the iridescent turquoise water colors allowing for postcard perfect photo shots. We provide all of our guests with free snorkel equipment to marvel at the colorful reef and the multitude of fish species surrounding the wreck. On our second stop, a typical San Blas paradise island, you will be served a tasty and freshly prepared lunch, with a choice of fresh fish, mixed seafood or chicken (note: we also offer alternatives, if you have diet restrictions). Spend time exploring this beautiful island, meet the friendly Kuna family that inhabits it and learn about their culture, or just relax in the shade of a palm tree. More details at San Blas tours.

San Blas is lobster heaven. If you go snorkelling the chances are high that you will see them hiding in their little shelters.If not you can buy one from the Kunas and have it cooked to perfection by a local for $6. Not $60 like you’ll have to pay in a fancy restaurant in Europe. $6 in San Blas.

The 360 or so tropical islands off Panama’s northern coast are home to the Kuna people, who since a revolution against the Panamanian government in 1925 have maintained political autonomy from the mainland. As such, they control tourism on their own terms – a very rare thing for an indigenous group. They know how many visitors are coming to their islands on a given day, where they will be staying, and they benefit directly from most of the tourist dollars spent. Aside from fuel for their motorboats, much of it goes on education, health or permaculture. Source: https://www.taotravel365.com/.

Mobile phones repair providers Colorado Springs

Smashed screens come in many different levels of severity and you could be dealing with anything from a completely shattered display and a non-working phone, to a small crack in one corner of the screen and a device that still works fine. Not all of these solutions are applicable to every scenario but we’ll try and guide you as best we can. The name of the game here is, “hold out until I’m eligible for an upgrade.” If you want to keep using the cracked phone, and don’t want to risk losing glass or slicing up your fingers, cover the screen with a layer of packing tape. Line everything up carefully and trim it with an X-acto knife and it may look almost like a real screen protector.

Bigger lifespan for you Samsung or other mobile phone brands? Wiping the screen & camera lens with a micro fiber cloth, and using a screen guard, helps in keeping the display free from dirt & scratches. A good mobile cover or carry pouch is a sensible option for protecting the phone from drops and scratches. In addition, it is advisable to clean the mobile case occasionally.

After you have your phone repaired maybe it’s time to buy a better screen protection ? If you want to protect your screen and save money, then JETech is the manufacturer you’re looking for. JETech caters to a variety of phone brands, all for an affordable price. Affordable doesn’t mean the products are cheaply made, however, as all of its screen protectors are made with tempered glass, offering impressive damage resistance. You also get multiple protectors from a single purchase, so you always have more to fall back on, should you ever need to.

Repair manual websites like iFixIt have several tutorials on how to fix various devices’ phone screens, complete with guides on what components you should purchase and where you can get them. This can get a little pricey – an iPhone 6 screen repair kit costs about $150 – but it is cheaper than buying a new phone altogether. Of course, not all of us have the skills or time to fix our own phone screens. But this is amateur stuff, i suggest to see a professional. Read more details on iPhone repair.

Top welding tricks

Here are a few tips about welding equipment and how to make the best purchase picks. Welding faster may sound appealing, but aside from practice, there are few shortcuts when creating a strong weld. In fact, unless a situation calls for a fast-moving weld, there’s a good chance that slow and steady is the way to go. An online search for ways to weld faster, will yield either descriptions of the ways automated welding has increased welding speed or press releases from companies who claim their gas or electrode holds the key to improving welding speed. In other words, it can seem like spending a lot of money is the only way to weld faster. However, for those looking for some ways to save time on their welding projects, there are some ways to weld faster for certain projects. While it’s not always a good idea to find a way to weld faster, there are situations when welding faster may produce a better product or a few simple changes can speed up the time on task.

What factors should you consider when determining a budget? You may already have an estimated budget in mind. The type of welder you purchase should be suited for the specific functions you require as well as the projects you will work on the most. Think about your end goal and consider opportunities to expand the usefulness of your welder. Will you want more power or amperage in the future? It is important to take note of the varying amperage and power requirements as well as the duty cycle necessary to achieve the most effective and economical operational results for the projects you’re looking to complete. In addition to the cost of the welder itself, don’t forget to include costs for the accessories and supplies you’ll need to operate your new welder. This includes welding protection (helmet, gloves, jacket, etc.) as well as gas and consumables.

Eliminate Any Extra Welds from the Design: Look for ways to modify product designs to eliminate unnecessary welds. For example, one company that manufactured boxes originally had a design that called for welded lift handles on each side of the box. By simply changing the design of the box to cut out lifting slots, it eliminated the need for welding the handles – saving time and money. In another instance, rather than making a part with an open corner, the design was changed to accommodate a closed corner, which meant 1/3 less metal required to fill the corner. Look for Items That Can Be Welded Rather Than Cast: We’ve already discussed ways to eliminate welds to create efficiencies, but what about adding welds? In some cases, it may be more cost effective to weld metal pieces to a part rather than cast the entire component in a costly alloy or exotic metal. For example, a company that originally used a part cast in a high-nickel alloy found that 50 percent of the part could be composed of standard, structural steel which allowed a savings in material and thus a savings in total cost. Also, the company was further able to redesign the part so that it was more efficient. Searching for the best Welding Fume Extraction? We recommend Welding Supplies Direct & associated company TWS Direct Ltd is an online distributor of a wide variety of welding supplies, welding equipment and welding machine. We supply plasma cutters, MIG, TIG, ARC welding machines and support consumables to the UK, Europe and North America.

Not all aluminum alloys are weldable: For example: 7075 and 2024 are not considered readily weldable using TIG welding. You can usually TIG weld them and they might be fine for a tool tote or some little art project…but don’t be fooled. You can’t depend on the welds in critical applications. Take a tree stand for instance. Lets say Joe gets a good deal on some aluminum angle iron at his friends scrap yard and he decides to make a tree stand. Joe has no way of knowing what alloy of aluminum he got from the scrap yard. He makes the tree stand, it holds together and looks just fine. The welds are real pretty…like a stack of dimes. One day he is sitting in his tree stand about 20 feet up a tree. The stress corrosion that has been happening on a microstrucutural level since he finished welding the tree stand finally comes home to roost and CRACK!!

Top welding advices: how to become a better welder and how to select the best welding equipment. How do I choose what size Tig Welding Rod should I use for the job? For sheet metal up to 1/8” thick, don’t use a welding rod that is bigger than the thickness of metal you are welding…at least not much bigger. A good example…is using a 3/32 rod for welding .040 metal. That will just give you a fit. The amperage is low and the weld puddle needs to be small in order to prevent blowing a hole…and then when you dip the rod into the puddle, the rod is a big heat sink and sucks the heat right out of the puddle making it hard to maintain a consistent size bead. But Beginners should probably not be practicing on really thin metal. If you are a beginner you should be practicing on around 1/8 ” thick metal, and the bigger the rod, the easier it is to feed. For 1/8 ” metal, Use larger diameter rods (3/32” to 1/8”) So here is the rule….thin metal, use a thin rod Thick metal, use a thicker rod. This might seem like a no brainer, but I have answered a lot of questions like this about the rod melting before it gets to the puddle. If torch angle and arc length are right, its usually the rod size.

Never forget that welding, when done improperly, can be hazardous. Electric shock, fumes and gases, arc rays, hot parts, noise and a host of other possible hazards come along with the territory. The ultraviolet and infrared light rays can also burn your skin — similar to a sunburn but without the subsequent tan — and your eyes. This is why the best MIG welding operator knows how to stay safe.

All welding requires the application of heat, which melts the metal being welded. With the TIG process, the heat comes from an electric arc that streams between the electrode in a hand-held torch and the metal being welded. The arc and molten metal are shielded by an inert gas, which protects the electrode and base metal from oxidizing. Filler rod is usually added to the puddle of molten metal as the weld progresses. The essence of making a good weld is heat control, which is governed by how you modulate the arc as it streams from the torch. Let’s look at this in detail. Source: https://www.weldingsuppliesdirect.co.uk/.

List of high risk merchant processors 2019

High risk gateway in 2019. This is a popular subject as more countries open up to new services. High-risk merchant accounts are a subset of finance services that enable firms to receive card payments from clients. Credit card processors assign merchants to one of two categories: high risk or low (normal) risk, based on a number of factors. High-risk merchants face limited options in processors, plus raised fees and stricter contracts. Being considered as high-risk looks terrible. But in some scenarios, it can be your only option. We have been writing about multiple aspects of the high-risk merchant account industry for many months and have most likely reached on most, if not all of them, of the most decisive problems. Here are some more advices on high risk merchant account processor.

High risk credit card processor : Instabill offers PCI compliant solutions–including online payment gateways–and a global reach. They work with all major credit card schemes and their solution supports international currencies, including British pounds, euros, and more.

A lot of financial service providers do business exclusively with low-risk businesses, who they consider as a low risk investment. That means businesses considered high-risk will have a limited selection of potential processors to choose from. Any processor you approach will take a careful, detailed look at your business to determine if you fall under their definition of “high risk,” based on the financial risk your company represents. It’s practically impossible for eCommerce merchants to do their business without having enabled as payment type the credit or debit cards. Before you can take “plastic,” you have to use a payment processor who acts as a liaison between you, banks, and credit card networks. See extra info at High risk travel merchant account.

Instabill was one of the better high risk merchant account providers we came across in our search. Their customer support agents were very clear and forthcoming with information. One thing to note is that Instabill is not cheap. For example, a Tech Support business would need to pay 4.95% + 0.25 plus the interchange fee for every transaction. That is significantly more than what non-high risk merchants charge, and even slightly higher than other companies on this list. However, this is unavoidable in high-risk industries. The reason we were pleased with Instabill’s offer was due to how easy it was to get pricing information in the first place – something that can’t be said for a lot of their competitors. Instabill does not post any of their prices online, since the cost will be highly dependent on the industry and bank involved in setting up the merchant account. However, you can get a quote by speaking with a sales representative and obtain a quote very quickly.

We worked with all of the high risk credit card processors, to be able to compare and a solid pick is iPayTotal. They cover all business types, have a huge experience in the business, fast customer support and low fees.

Our banks have been selected to assist our customers to get the most secure high-risk merchant account solutions for their business sectors. We have chosen the banks with the highest integrity and methods, adding confidence to your payment processing solution, to get you the best transaction fees for high-risk sectors. We offer the kind of value and personalized service your business needs to get off the ground and grow. Our support team will work with you to identify the best merchant services and payment products to fit your needs. And, whether you have a question about your merchant account, need help with chargebacks, or have a question about your statement, our representatives are ready to help 24/7.Our team will prepare a solution tailored to your business. ?We combine the right technology with service and support to ensure you never miss out on an opportunity. Source: https://ipaytotal.com/ipaytotal-high-risk-merchant-account/.