Stone coatings provider

Stone coatings made in USA producer: Oil-based polyurethane has a slight amber or yellowish tint and can yellow even more over time, which adds a bit of rich, warm, amber color to the floors if that’s your goal. You’ll find it in high-gloss, semi-gloss, and satin sheens. This finish has a very strong odor and releases a high level of VOCs, so you’ll need to don a respirator to protect your lungs if you plan on finishing the floors yourself. You’ll also need to allow quite a bit more time for the project than with water-based polyurethane and clean up with mineral spirits rather than soap and water. Generally, it takes eight to 10 hours for each coat to dry (two to three coats total is the usual recommendation). After the last, you’ll need to wait at least 48 hours before walking on the floors in shoes and four days to fill the rooms with furniture once more.

LiquiGuard produces protective coatings for Industrial, commercial and residential floors and counters. Our unique and water based protective coatings are ideal for refinishing worn and stained ceramic, porcelain, enamel and similar surfaces in bathrooms and kitchens. In addition, our protective coatings can refinish practically all everyday surfaces to a factory new finish. ShineOnFlex is a clear, flexible coating that creates a glossy “wet” appearance on soft and flexible surfaces. An addition to our ShineOn line, ShineOnFlex is designed for surfaces such as tire sidewalls and window seals by enhancing the material, and creating a clean, shiny finish that is long lasting and oil free.

Liquiguard Technologies has the best metal coating solutions designed to protect, maintain and extend the lifespan of a wide range of metals including aluminum, brass, bronze, chrome, pewter, cast iron, silver, stainless steel, etc. This unique line of eco-friendly, biodegradable coatings offer solutions to prevent tarnishing, oxidization, flash rust and corrosion, by repelling moisture, too. These water-based coatings are safe and easy to apply without releasing any toxins or fumes. And will maintain the look and feel of your metals without damaging the surfaces. Discover extra details on Metal protective coating.

Thermal Shock. Temperature fluctuation or thermal shock is an important condition that must be considered. Thermal shock, such as steam cleaning of the floor surface, will cause a loss of bond from thermal expansion if the floor system is not chosen properly. The coefficient of expansion of most coating systems is much higher than for concrete and must be carefully considered when selecting a material. Once you have identified the degree of severity of the major areas of abuse, you must rank them in order of importance for the particular project. This will provide a major focus for what is needed in terms of material and applied thickness. The last of the material selection process is possibly the most important. It involves how the coating project is going to look aesthetically, how it’s to be applied, what the time frame for installing the system may be, and last, but certainly not least, what are the budget parameters.

FlexDuraCote is a water based, colorized, floor coating that is a single component solution, which means no mixing required. This anti slip topcote seals and protects home and commercial environments from slip and fall accidents, as well as adding decorative and stylish value to the property. It is designed for both indoor and outdoor surfaces and creates a safe, non skid surface that protects the applied surfaces from rain, oils and greece. Discover even more information at here.