Altitude valve water tank manufacturer right now

Altitude control valve factory in China: Water Distribution Systems: Altitude valves are commonly used in water distribution systems to control water levels in elevated tanks or reservoirs. They ensure that the tank does not overflow or run dry by automatically adjusting the flow of water into and out of the tank. Irrigation Systems: Altitude valves play a crucial role in maintaining optimal water levels in irrigation systems. They help regulate the flow of water from storage ponds, ensuring that crops receive adequate irrigation without wasting excessive amounts of water. Fire Protection Systems: In fire protection systems, altitude valves help maintain adequate water pressure in standpipes and fire hydrants. This ensures that firefighters have sufficient access to pressurized water during emergencies. Read more info at https://www.shsuotevalve.com/news-detail-4609878.

The altitude control valve can control the high water level in reservoirs. Without the need for floats or other devices. It remains fully open until the shut-off level is reached. This altitude valve is designed for one-way flow only. The water tank altitude valve is hydraulically operated and pilot controlled. The pilot control operates on the differential in forces between a spring load and the water level in the reservoir. The desired high water level is set by adjusting the spring force. The pilot control measures the reservoir head through a customer supplied sensing line connected directly to the reservoir. SHSUOTE wholesale high quality altitude control valve with the best price. If you are looking for altitude valves for water tanks, Contact us now!

FBGD is a double eccentric flange butterfly valve, with soft seal on the body, it has the lowest operational torque, much less wearing, the dovetail seal design has been proven over half century service with reliability. Features: The butterfly valve is made of DI body and DI disc; Advanced newly design with dovetail seal design and captured by epoxy on the back, with multiple raised ring to have more contact with disc but less friction during closure; The double eccentric design provides less contact area of seal with disc, and less stress at the open position of the disc; The disc design with arch shape and thru disc can provide better flow capacity, stronger and less weight . The shaft and disc connection with tangential pin which can be exchangeable and provide rigid connection. The DN 100-500MM use flat disc, and DN 600-1200MM use arch shape disc; Epoxy coated interior and exterior. Valve design meets or exceeds EN 593; Top flange connection meets ISO 5211-1982, and F/F meets EN 558-1 series 13 & 14.

NSCV- Non Slam Check Valve is used as protection against reverse flow when power failure in areas where noise pollution or water hammering is a critical issue. It can provide not only quiet performance but also low head loss. Features: High strength ductile iron body used for durability and less weight; Advanced dynamic design of single body with diffuser provides streamline flow and assures lower head loss; One of the lowest head loss check valve, big save in pumping power cost, valve disc with shorter stroker and spring reverse faster than most of check valve; Coated with powder epoxy both inside & outside for corrosion resistance; Bronze bushing reduce wearing problem during operation; Hydrodynamic design with spring ensures non slamming and water hammerless; Stainless steel spring hidden in the diffuser under protection while valve in operation; Disc will positively close before reverse flow, and maximize the closing speed up to 0.2 Sec; Installation can be vertical/horizontal/ inclined. For size DN800 and up preferred vertical installation. ·Comply with EN 558-1, ISO 5752 and EN 1092-2, ISO 7005-2 flange dimension. See more information at shsuotevalve.com.

How do Altitude Valves Work? Altitude valves play a crucial role in maintaining water levels in storage tanks, preventing overflows and ensuring a steady supply. But how exactly do these valves work their magic? At its core, an altitude valve operates based on the principle of hydrostatic pressure. When the water level in the tank drops below a certain threshold, the valve opens to allow water from the main supply to enter and replenish it. Once the desired level is reached, the valve closes again. This process is made possible by two key components: a float mechanism and a control pilot. The float mechanism senses changes in water level inside the tank and relays this information to the control pilot. The control pilot then regulates whether or not to open or close the valve based on this input.

The automatic control valve is an essential component for optimising system performance. The S900 series of automatic control valves are Basic valves to provide hydraulically driven solutions to pressure, flow and level control applications. We are an automatic control valve manufacturer & hydraulic control valve supplier since 2004, all of our industrial Automatic Control Valves have passed a series of international quality assurance systems and product safety certifications. Features: Top and seat ring guided stem and diaphragm assembly for long life and reliability. All iron components are fusion epoxy bonded for corrosion resistance. Easy maintance without removal from the main line. Nylon reinforced diaphragm for long time service. Drip tight shut off. Globe design for superior control characteristics. Meet standards BS EN 1074-5, ISO 5208. BS EN 12266-1, BS EN 558-1.