High quality pcb prototype assembly provider in China

Top rated pcb supplier right now? As a professional PCB manufacturer and with more than 15 years’ rich experience in PCB manufacturing, A-TECH is capable of manufacturing various PCB types, include: single-sided PCB, double-sided PCB, multilayer PCB up to 30 layers, Aluminum PCB, flexible PCB, Rigid-flex PCB, HDI PCB, Microwave RF PCB etc. We’re skilled in different special pcb technology, include: thick copper PCB, Hybrid PCB, PCB edge plating, Via In Pad(Resin Plugged), Countersink & Countersunk, Half plated hole, press fit hole, control depth routing, impedance control. We can also meet different demands of PCB surface finish, include: HASL, HAL(Lead free), Immersion gold/Tin/silver, hard gold plated, gold fingers, OSP, Peelable mask, carbon ink etc. We have HASL, HAL(Lead free), Immersion gold and OSP surface finish in house to meet majority PCB demands with ripid delivery. Read additional info on pcb manufacturer.

As a primary testing technique in PCB assembly, AOI applies to fast and accurate inspection of errors or defects occurring in PCB assembly process, so that high quality of PCB assemblies can be ensured with no defect after their leaving assembly line. AOI is contributive to efficiency improvement because it is placed on SMT assembly line, just after reflow. As soon as some problems are inspected and reported by AOI equipment, engineers can instantly change corresponding parameters in the previous stages of the assembly line, so that remaining products will be correctly assembled. AOI can cover primarily come in soldering and components categories. In terms of soldering, AOI detect the defects ranged from open circuits, solder bridges, solder shorts, insufficient solder to excess solder. Component defects include lifted lead, missing components, misaligned or misplaced components.

Sometimes people will use abbreviation MCPCB, instead of the full name as Metal Core PCB, or Metal Core Printed Circuit Board. And also used different word refers the core/base, so you will also see different name of Metal Core PCB, such as Metal PCB, Metal Base PCB, Metal Backed PCB, Metal Clad PCB and Metal Core Board and so on. MCPCBs are used instead of traditional FR4 or CEM3 PCBs because of the ability to efficiently dissipate heat away from the components. This is achieved by using a Thermally Conductive Dielectric Layer.

Tg means Glass Transition Temperature. As flammability of printed circuit board (PCB) is V-0 (UL 94-V0), so if the temperature exceeds designated Tg value, the board will changed from glassy state to rubbery state and then the function of PCB will be affected. If working temperature of your product is higher than normal (130-140C), then have to use High Tg PCB material which is > 170C. and popular PCB high value are 170C, 175C, and 180C. Normally the FR4 circuit board Tg value should be at least 10-20C higher than working temperature of product. If you 130TG board, working temperature will be lower than 110C; if use 170 high TG board, then maximum working temperature should be lower than 150C.

There are total 420 highly trained full-time employees with land area 30000 square meters and building area 18000 square meters in our PCB plant, we mainly focus on high-mix, low to medium volume pcb fabrication as well as quick turn pcb prototype to meet 24 hours delivery for double sided PCB, 48 hours for 4 to 6 layers and 72 hours for 8 or more high multilayer PCB at the fastest. The production capacity is 25000 square meters and more than 3000 varieties per month, the printed circuit boards we manufactured are widely used for different electronics industries, such as telecommunication, consumer electronics, computer, medical, automotives, military and so on, more than 60% of our PCB board are exported to Europe, North America and other Asian countries. Find even more information at https://www.atechpcb.com/.