High quality iso 8 cleanroom supplier today

Iso 6 cleanroom manufacturer and supplier in China? In order to maintain the required temperature, humidity, wind speed, pressure and cleanliness in the clean room, the most commonly used method is to continuously send a certain amount of treated air into the room to eliminate various heat and humidity interference and dust pollution in the clean room. To obtain the air in a certain state into the clean room, a whole set of equipment is needed to process the air, and it is continuously sent into the room, and part of it is continuously discharged from the room. This whole set of equipment constitutes a clean air conditioning system. See more information on https://www.sz-pharma.com/iso5-iso8-cleanroom.html.

Clean air-conditioning system is to control outdoor substances that affect the clean environment of clean rooms, such as dust, smoke, microorganisms, etc. It is a very important part in medical and health, food processing, and microelectronics engineering.

The clean air conditioning system is basically composed of the following equipment:

1. Heating or cooling, humidification or dehumidification and purification equipment;
2. Air conveying equipment and pipelines that send the treated air into each clean room and circulate it;
3. Provide heat, cold, heat source, cold source and piping system to the system.

This specification is created to manage important national guidelines and rules, creating standard construction acceptance requirements, unify testing methods, and ensure project top quality, save extra energy, shield the environment and safe operation during the construction of clean rooms (including prefabricated clean rooms, the same below). This specification is applicable to the construction and acceptance of newly-built and reconstructed industrial clean rooms and general biological clean rooms, and is not applicable to the construction and acceptance of special biological clean rooms with biological safety requirements.

The plane and space design of the clean laboratory will arrange the clean experimental area and personnel purification, equipment and material purification and other auxiliary rooms in different areas. At the same time, the comprehensive coordination effects of various technical facilities, such as experimental operation, process equipment installation and maintenance, air distribution type, pipeline layout and purified air conditioning system, are considered.

In Africa, some area only require cooling system of the air conditioning unit. Especially at island country, the air humidity is very higher 80-90% of year average. For noodles, pasta production factory, the humidity should be control at 30-40%. Like this condition we recommend rotary dehumidifier air conditioner or independent dehumidifier with air conditioner work together.

For the air outlet equipped with similar diffuser, the air volume can be found out according to the air volume resistance curve of diffuser (factory air volume resistance curve or field measured air volume resistance curve) and the measured diffuser resistance (the difference between the static pressure in the orifice and the indoor pressure). When measuring, use a micro manometer and a fine pitot tube, or use a fine rubber tube to replace the pitot tube, but the plane of the measuring hole must be parallel to the air flow direction. In addition, other methods approved by the professional testing department can also be used.

Today (Suzhou Pharma Machinery Co., Ltd.) will introduce to you, clean room airflow and influencing factors. There are many factors affecting the airflow in the clean room, such as process equipment, personnel, clean room assembly materials, lighting fixtures, etc. At the same time, the distribution point of airflow above the production equipment should also be considered.

Suzhou Pharma engaged in cleanroom turnkey project for many years, HVAC system design and installation is the main part in project. We supply air duct design, AHU solution and installation guide. Before we quote the equipment, the basic data is necessary, such as room clean grade, dimension and height, temperature and humidity request, the local highest/lowest temperature and humidity.

The clean room is generally made of foam color steel or rock wool board with a vertical wall and an independent air-conditioning air supply system. The air is filtered through high-efficiency three-stage filtration in junior high schools. The personnel and materials are equipped with an air shower room and a transfer window for clean filtration.

The above introduction is related to the introduction of clean room and testing purpose.If you have different opinions or suggestions, you can always contact us.As long as you want the clean room project, Suzhou Pharma Machinery Co., Ltd. will realize it for you.Choose a reliable engineering company, Suzhou Pharma Machinery Co., Ltd., will be responsible for your project to the end, and the reputation is guaranteed.Our company has completed 500+ clean room projects all over the world. Many new and old customers like to buy the products they want in our company. The price is reasonable, the integrity is guaranteed, and the after-sales service is good.If you have related (clean room) projects recently, you can contact us at any time. Read more details on https://www.sz-pharma.com/.

Governments of various countries have different requirements for clean design conditions, so attention should be paid to government requirements when designing. The choice of refrigerant should pay attention to whether it needs environmental protection type.

The cleanroom advantage include:

1. handmade sandwich panels can always be customized to meet every need,module width, module height are variable dimensions. no need cutout in the Installation site.
2. GMP double layer glass walls can customized.They allow to see into the production process and create a different working atmosphere.
3. LED lights reach UL standard.
4. For special hygiene requirements, our offers higher-quality integrated,hollow-profiles systems that prevent ingress of dire,air dust and moisture. Our design according to ISO14644-1 International standard.
Suzhou Pharma hope that in this new year, we have a new breakthrough in clean room technology, which can help more friends in need.

Legal support NJ, USA with Sandy Ferner right now

Professional law guidance NJ, USA from John Sandy Ferner? Cohabitation is defined as an intimate personal relationship in which the couple shares duties and privileges normally associated with a marriage or civil union. That is the legal definition. When cohabitation exists, a former spouse has the ability to seek a termination or suspension of alimony that’s being paid. People often wonder how they can prove cohabitation. It’s not always an easy thing to prove. We look at things like social media. We will go on Facebook pages, and we’ll see if the couple is vacationing together, if they’re recognized in their social circles as a couple, if they’re at special events together. We will oftentimes hire a private investigator to conduct surveillance and go to a household and see if it’s a boyfriend that is mowing the lawn or doing repairs around the household or other kind of household chores that you would normally associate with a married couple or a civil union. Read more info at Sandy Ferner New Jersey, US.

Law advice of the day with Sandy Ferner : A lot of my clients come to us and ask the question, “In my New Jersey divorce case, how can I keep my expenses down?” It’s a great question because here we pride ourselves on being mindful of people’s money and mindful of our legal expenses. There’s no need, in a lot of cases, for people to spend exorbitant amounts of money on things that they could do themselves – little things like making ample copies, making sometimes three and even four sets of copies of discovery.

Property owners must ensure that their premises are safe for visitors and guests. Not only does this include eliminating slip and fall accident hazards, but this also includes every other part of the premises where people could pass through. Some of the most common causes of premises liability accidents include accidental poisonings, defective displays, faulty stairs, elevators, or escalators, and more. Product manufacturers, companies, distributors, and third-party sellers have the duty to ensure that any product sold to consumers is safe. Unfortunately, there are times when defective products make it to the market. This can include products with defective designs, products damaged during the manufacturing process, and products that have misleading or inaccurate labels.

Discovery is a formal request for information and documents during the lawsuit process. If the case is pending in a justice of the peace court, court approval must be given prior to either side beginning the discovery process. If the case is pending in a county court or a district court, court approval is not needed. Typically, but not always, discovery must be concluded thirty days before the case is set for trial. If the ‘Plaintiff’ (the person or company doing the suing) believes that they have all the proof they need to win the lawsuit (and there are no disputed facts), they can file a writing with the court asking for a judgment to be entered. This writing is called a motion for summary judgment. If the ‘Defendant’ (person being sued) believes that the Plaintiff is absolutely lacking some of the proof required to win the lawsuit, the defendant can file a writing asking that the case be dismissed. This writing is called a no-evidence motion for summary judgment.

Presuming that there is no justifiable or reality-based reason why that parent cannot see the children – it’s not an abuse situation, there’s not a neglect situation, there’s nothing like that – just a refusal by one parent to allow the other parent to see the children and that refusal is unreasonable, then we need to rectify that quickly. We may need to get the court involved quickly and file an application to have immediate parenting time with the children. Whatever that schedule looks like, we would have to talk about it – if it’s overnights, if it’s 50/50, and what that means – and we’re going to have to get into court really fast to have a judge address this quickly. The last thing you want to do is let that go on or prolong that because then you get stuck in the situation of, “You let this go on for too long. You didn’t really want to see the kids, and now you’re coming back and you want to see them.”

Several monumental decisions have come down in the New Jersey Supreme Court, regarding defendants’ Miranda rights. These court cases have brought into question whether or not law enforcement officers can lie and or use trickery to obtain a confession. However, this could result in a false confession and can lead to them being falsely accused or wrongly incarcerated, as well as having said confession used against them in court. This is a violation of defendants’ Miranda rights. NJ Supreme Court Justice Albin has concurred and dissented on cases to protect defendants’ Miranda rights. It is obvious that he does not believe in the use of trickery and lies by detectives to acquire a confession. Before retiring, he has demonstrated his principles and opinions in his last few cases.

Top recliner couches online store Durban

Premium recliner couches online shop Durban, ZA? Where to begin when embarking on the search for the best couch? A good place to start when furnishing any room is with a mood board. Whether physical magazine rip-outs or digital idea pinning, use it to collate all of the ideas you love into one place and then eliminate anything that doesn’t fit the overall scheme. This can help you to determine the room style you want to achieve and work out which sofa shapes will best suit that look. It will also keep you on track when you hit the stores, anchoring your ideas so you don’t become swayed by the uber-contemporary two-seater that doesn’t match your rustic country cottage dream. Our living room ideas page is a great place to find some inspiration. Find extra information on couches for sale Durban.

How much space a sofa can take? The sucasadesigns.co.za sofa buying guide is meant to help you choose the perfect sofa. Preferably, before you buy, you should determine how much space in your interiors you can spare for the seating unit. A good method, also used by interior designers, is to draw the outline of the furniture on the floor. This helps you figure out if the size is right, whether it will not overwhelm the arrangement or whether you can decide on a larger model. After such a test, it is easier to settle on a specific type of sofa, because it is much quicker to estimate, whether e.g. a corner sofa, whose one section is much protruding towards the front, is right for the interior.

A new sofa is a purchase that no one makes lightly. It’s an investment! And something you’ll be using almost every day. “Your sofa is a big piece that will define your space,” says designer Sucasa. You probably already have a style in mind that you like, but, if you’ve never bought a couch before—or if you’ve found yourself regretting past sofa purchases—you might be looking for a little direction. This guide will help you find a sofa you’ll love for years to come (and one that will last as long, too!). What Makes a Well-Constructed Sofa? A lot of materials are required to make a sofa, and some are better than others—at least when it comes to longevity. A sofa with a particle-board frame and all-foam cushions might be the most affordable option, but it won’t necessarily be the longest-lasting sofa you can buy. (And maybe that’s fine by you!) A higher-quality sofa, on the other hand, will have the following construction.

How many seats should the sofa have? The size of the sofa depends on how many people will use it. It is worth bearing in mind both everyday use and special occasions, when our relatives come to visit. A three-seater sofa, a four-seater sofa and a corner sofa – these models will work well if you have a large family or your friends visit you often. And if this is still not enough, the best solution is to arrange two pieces of furniture in such a way that they face each other. This encourages conversation! However, when we know that the piece of furniture is to seat only a few people, a two-seater will be a great choice. In addition, it is a small seating unit compared to the previously mentioned models, so it is easy to fit it into rooms such as a study, hallway, or bedroom, where a smaller piece of furniture is usually more desirable. Discover additional info at https://sucasadesigns.co.za/.

Safe Provestra online store right now

High quality Provestra online supplier right now? The manufacturer responsible for producing and distributing this product is concerned with women’s sexual health and focuses on manufacturing more products so as to cater to their needs throughout. They combine their efforts and skills to ensuring they offer quality and an outstanding product, which works without tampering with the user’s general health. They target customers across the world and offer free shipping services. In addition, they claim that the daily use of this product without bypassing the instructions provided normally leads to improved sexual performance. Read extra information on Provestra Pills.

Certain medications such as antidepressants, contraceptive pills or hypertension pills: Because of the estrogen they contain, oral contraceptives can affect the libido, and other drugs can have this negative effect, including those that reduce blood pressure and anxiety. , those for gastro-oesophageal reflux and antidepressants. For some, you can’t do anything because you need to take them, but others can be successfully replaced (such as using contraceptive methods that do not involve hormones, such as condoms or diaphragms).

Always practice enthusiastic consent: If you’re not sure whether your partner is into it, always ask! Where does arousal fit into the stages of sexual response? According to the United Kingdom’s National Health Services (NHS), researchers have identified four stages of sexual response — that is, the stages your body and mind goes through before, during, and after sex. Arousal falls into the first stage of the sexual response cycle. The sexual excitement stage — also known as the arousal stage — involves a range of physiological changes in the body. Most of these functions prepare the body for vaginal intercourse. For example, your vagina becomes more wet because the glands produce lubricating fluids. Your clitoris and vulva swell up as your blood vessels dilate. Your nipples might become more sensitive to touch, too.

Other woman libido enhancers: Provestra : Women have a lot going on in their lives. There’s the possibility of pregnancy, childbearing, post-pregnancy, menopause, stress, monthly menstruation… and that’s just to name a few. All of these can result in hormonal imbalances , which in turn deprive the woman of one of the best pleasures in life – the intimate moments with the love of her life. This is where Provestra comes in. Provestra is an all-natural female enhancement supplement that increases sexual desire. It is made from the best quality ingredients and adheres to the highest pharmaceutical safety standards. Provera uses cGMP certified pharmaceutical manufacturers that are also used by Walmart, Rite Aid, Safe Way, and other retailers selling life-changing drugs. It’s a formulation of high-quality natural herbs, aphrodisiacs and nutrients, all of which help to balance out the hormones.

Magnum tonic wine: Wow, this shit sounded really good. Leaving aside the fact that it has the worst soundtrack in advertising history, Magnum wine contains 16 percent alcohol and the label promises sexual vitality. Unfortunately, it tastes of ash and death and you have to hold your nose or belly while you drink so you don’t vomit immediately. After I threw a few bottles on my neck, I tried and failed to stab my colleague in the apartment, I made some potatoes in the oven, then I fell asleep on the couch.

What ingredients are in Provestra? Theobromine acts similar to caffeine in the body, a mild stimulant that widens blood vessels. It’s been used for centuries as an aphrodisiac. It’s commonly found in cocoa, chocolate, and tea leaves. Studies show that indole-3-carbinol can reduce the amount of estrogen in the body, which is helpful for those who have excess estrogen. Often, excess estrogen can cause a lower sexual drive. Indole-3-carbinol occurs naturally in many vegetables, such as cauliflower, turnips, and brussels sprouts. Ginseng is a root that has been used in Chinese medicine for centuries. Its properties have been shown to reduce hot flashes and night sweats in menopausal and perimenopausal women. See more details at https://provestrapills.com/.

Tourism and climate education at DefinePlaces

Travel and culture information right now? The Dead Sea is the lowest point of dry land on earth at 431m (1,414ft) below sea level, making for a fascinating natural wonder that no visitor to Jordan should miss. Known for its exceptionally salty but soothing waters, the mineral-rich mud has attracted visitors including the famous Egyptian queen, Cleopatra. Tourists can still float on their back on the therapeutic waters and luxuriate in the black mud – just avoid getting it in your eyes. Enjoy a private boat cruise on the Dead Sea as part of Culture Trip’s specially curated Jordan trip, led by our local insider. Discover more info at Define Places.

Built in 1565 by the Saadians, the Medersa (madrassa – Islamic school of learning) of Ben Youssef is the largest theological college in Morocco. The warrens of rooms (with student cells that once were home to 900 pupils) are clustered around small internal courtyards in typical Islamic architecture style, but the main internal courtyard is the real highlight here. The fine zellige tiling, stalactite ceilings, cedar-wood detailing, and Kufic inscriptions used as decoration across the courtyard’s interior make this medersa one of Morocco’s most beautiful buildings and a star medina attraction.

Sitting slap-bang between Dubai’s older neighborhoods clustered around the creek and the city’s modern sprawl, this ginormous 150-meter-high picture frame is one of Dubai’s latest sights. Inside, a series of galleries whisk you through the city’s history and explore Emirati heritage before you travel up to the Sky Deck, where there are fantastic panoramas of both old and new Dubai to be snapped on the viewing platforms. Afterwards check out Future Dubai gallery, which imagines what a futuristic vision of the city will look like. Sheikh Zayed Road is the main thoroughfare running through Dubai’s modern downtown business district. This wide, eight-lane highway is rimmed with towering glass, chrome, and steel high-rises along its entire length. It’s one of the best on-the-ground vantage points for Dubai’s famed skyscraper views.

As the largest island in the Mediterranean, Sicily promises more sand, sunshine and secret anchorages than almost anywhere else. The Aeolian Islands – seven sub-tropical isles and scores of volcanic specks – are Sicily’s biggest yachting draw. Italian A-listers and humble fisherfolk sail atop crystalline waters suffused with seismic bubbles. Both enjoy platters of seafood spaghetti served on volcanic black-sand beaches. Sail in and join the club. They don’t call the island of Stromboli “the lighthouse of the Mediterranean” for nothing. A puffing volcano stands 924m (3,032ft) above the sea, offering sailors a 24/7 navigation point for the other six Aeolian Islands. Tie up in Stromboli’s mini-marina. Then tuck in. Island cuisine is a fiery mix of volcanically charged chillies and swordfish steaks.

If you have 2 days in Santorini, in addition to the first day described above, you should do a boat-trip to Nea Kameni. You will walk to the top of the volcano and take a dip in the hot springs. You can book this tour by clicking here. And if you prefer a more luxury version in a catamaran, it’s right here! This cruise is clearly a must-see attraction in Santorini! If you’re spending 3 days in Santorini, in addition to the 2 days above, you can visit the island’s other villages and the ancient site of Akrotiri. Then, how about ending your day at one of the many beaches? You’ve planned 4 or 5 days in Santorini? You’re lucky! In addition to all the best places to see on the island, you will have time to take another tour, like Santorini wine tasting tour. You will taste 12 of the island’s best wines. There are also other interesting activities to do in Santorini.

Coming to Panama City, I really wanted to make sure I got to see some of the country’s wildlife. People often forget just how diverse this part of the world is, so I decided to do the tour to Monkey Island on the Chagres River and Gatun Lake. Our tour began in Panama City but we quickly left the city and headed to Gamboa Marina to catch our boat out to the island. The tour through the river and lake was interesting. Both the Gatun Lake and the Chagres River are actually part of the Panama Canal and you can often see ships making their journey through the canal. However, the highlight of my tour was of course the monkeys! There are 4 different species that call Monkey Island home, they are the Mantled Howler Monkey, White-Faced Capuchin Monkey, Tamarin Monkey, and the Lemurine Owl Monkey.

Quality magnetic core manufacturer

Common mode chokes supplier by transmart.net? Transmart transformer core manufacturers are an export oriented company with customers located in 40+ countries. We supply high quality tape wound cores in Nanocrystalline, Amorphous and Silicon Steels. Product applications including Common mode chokes ,Hall Effect Current Sensors, Low Voltage and Medium Voltage instrument transformers, Earth Leakage Circuit Breakers ,Reactors, Inductors etc. Find even more information at https://www.transmart.net/common-mode-chokes. Toroidal transformer supplier will full supply chain from raw materials and cores to finished.

An electric vehicle (EV) is one that operates on an electric motor, instead of an internal-combustion engine that generates power by burning a mix of fuel and gases. Therefore, EV is considered as a possible replacement for current-generation automobile, in order to address the issue of rising pollution, global warming, depleting natural resources, etc. Transmart manufactures Cores for Hall Effect Current Sensors, Current transformers, Common mode chokes, inductors etc used in the Automotive industries.

Apart from that, Common Mode Chokes also block high-frequency signals while allowing the low-frequency signal to pass through. It stops Radio Frequency Interference and works as a filter for suppressing high-frequency noise. High-frequency noise is also known as common mode noise, which explains the name of this product. A Common Mode Choke balances the currents flowing in and out of a device, ensuring that your machine doesn’t get overheated.

Silicon steel has a number of unique properties that make it ideal for use in transformer cores. These include: High permeability: Silicon steel has a higher magnetic permeability than other types of steel, meaning that it can support a higher magnetic flux density. This makes it ideal for use in transformer cores, where it helps to increase the efficiency of power transfer. High resistivity: Silicon steel has a higher resistivity than other types of steel, meaning that it resists the flow of electrical current. This makes it ideal for use in transformer cores, where it helps to reduce losses. Corrosion resistance: Silicon steel is resistant to corrosion, meaning that it can be used in silicone steel transformer cores without the need for protective coatings.

Transmart Industrial insists on the use of high-quality materials and advanced technology to manufacture soft magnetic materials. Besides, we strictly monitor and control the quality and cost in each production process. All this guarantees the product to have high quality and favorable price.Transmart supplier has a complete and mature service team to provide excellent services for customers and seek mutual benefit with them.

Such a amorphous transformer is up to customers’ needs for a highly cost-effective product. The silicon steel core is one of the main products of Transmart Industrial. Silicon steel is a traditional magnetic material mainly for 50Hz to 1000Hz electronic and electrical applications. Our silicon steel toroidal core series has many styles to meet the diversified needs of customers. We manufacture various type of steel cores in silicon steels, such as Current Sensor Cores, silicon steel transformer core, Instrument Transformer Cores, Torodal cores, C-cores, Unicore etc. Read extra details at transmart.net.

Lock changes services London, UK 2022

Premium lock changes companies London? Have you recently relocated to London or the nearby area? Have you lost your house key? Is one of your locks broken, or outdated and do you wish to replace them? get our locksmiths Throughout greater London, including Liverpool, and Manchester. Auto Pro Locksmith provides a range of lock changes and repair services. We are also the only firm in London that provides emergency lock replacement services 24 hours a day, seven days a week. Find additional info at lock change London.

If you’re planning to go away on vacation this summer, now might be the time to install one of the best smart locks. Need someone to come by your house and walk the dog or check in on the cats? With a smart lock, you can provide them (the person, not your pets) with a virtual key so that they can only enter at certain times. And, you’ll get an alert when they come by. And when you get back, you can delete the virtual key in a snap. Did you ever leave the house and forget if you locked your door? A smart lock can help with that, too. Not only can you program it to lock automatically when you leave, but you can also lock it remotely from wherever you happen to be. These are just some of the benefits of smart locks, but all are not created equal. That’s why we’ve tested a number of models to bring you the best smart locks.

Laser cut keys are for the more tech-savvy crowd that wants an added level of protection. Whether or not they are ‘better’ than mechanically cut keys is up to the owner, but laser keys are precise and a nice countermeasure to people you don’t want controlling your vehicle. Laser cut keys are a common request by consumers. Transponder car key programming can be done by a locksmith without an existing key which is working by finding the code that is necessary for your transceiver. This code can then be matched and copied onto a blank key to fire up your method of transportation.

This is a type of master key that is also called a “passkey.” The serrated edge of the key is generally sanded down so that the key can be able to open a number of different locks. While the name may sound scary to some people, it is only known as a skeleton key because the key has been reduced to include only the essential parts. Some people use the term “skeleton key” to refer to any type of master key or keycard that can be used to open a number of locks, while others erroneously use the term to describe bitted keys that are used on lever tumbler locks. Generally, skeleton keys can be created by simply removing the middle of the key, which allows the key to enter and turn a number of locks. Many people associate these keys with illicit activities, such as breaking and entering or to open handcuffs, as it is possible to file down the original key for these purposes. There are legitimate skeleton keys and uses, including when you have lost the original key or it is simply unavailable.

Internal Cut Keys: Internal cut keys are also known as laser cut keys or sidewinder keys. An internal cut key has the notches in the straight rectangular blade inside a curvy groove. Usually the groove is on both sides so that the key may be inserted any way up. Internal cut keys are not subject to wear and tear and they are quite durable as compared to ‘regular’ keys. However, a specific type of machine is required in order to cut them.

This is one of the most common issues that we deal with here at AutoproLocksmith . The door might slam shut while you are outside, you might lose your key, or the key might get jammed or break off inside of the lock. Regardless, we can help you. We understand how inconvenient it is to be locked out of your own home. Therefore we endeavour to complete our jobs as efficiently as possible, to minimise the impact it has on your life. Our locksmiths dublin are highly trained in a number of different scenarios, and will always look to fix your lock if it is broken. However, if this is impossible, they are also trained to replace your locking mechanisms. See extra details at autoprolocksmith.co.uk.

If you detected an issue with the latch or deadbolt when you inspected your door, you might have a problem with your strike plate placement. The strike plate is the rectangular piece of metal on the door jam with a hole the size of the latch or bolt. You may need to tighten the screws on your strike plate to ensure it is sitting in the perfect place for the bolt to latch. Sometimes, the wood inside the borehole wears down or sticks out in a way that keeps it from latching. In this case, use a metal file to remove any wood getting in the way.

Best modern poetry from Jean Arno

Top rated contemporary poets with Jean Arno? Born in Paris, raised in Bordeaux and Nice, South of France, Jean Arno’s poetry is influenced by French classicism and ancient Greek philosophy. Growing up in the house of renowned professors, since young age Jean was surrounded by the greatest figures in the world’s literature. Jean has studied philosophy and literature in Stanford University, which allowed him to develop his own style over a decade. With this new poetry book, Trophies, he is bringing back a sophisticated style and depth of the thought in form of short aphorisms. Jean is also producing digital art and philosophical pieces which complements his portfolio. Discover more details on Jean Arno artist.

The evocative and poetic force of a work is diminished as soon as it does not help you see the invisible and plural strata of which the world is shaped—as soon as it does not propose an enriched vision of it. But the work could not be fully realized without the reader’s active participation: “It is that the highest truths are not given; they are conquered. Their gleams dazzle those whom they do not illuminate”. Trophies is an exceptional work: a must read.

The new, digitized universe, praised by Mark Zuckerberg, opens up a world of infinite creative possibilities, which is why the digital art gallery Art & Above has decided to take the plunge by moving into the Metaverse. “We have created a new kind of art gallery: any artistic object—including the art gallery itself—becomes the occasion for an artistic experience … for collaboration. The visitor is no longer a contemplator; he is called to become an artist himself and to create”, says the founder, Jean Arno.

What forms will the arts take in the digital universes now commonly called the Metaverse? 
NFTs (non-fungible token) artwork, protected by unique numbers, is now unequivocally the future of the arts. For example, suppose the punk-geek universe dominated the NFT art market in the 90s and 2000s with its video game, comics, manga heroes, heroic fantasy, and science fiction. In that case, it is now competing with artists who produce the new art of the 21st century. Such art includes satirism like Bansky’s iconic street art, with its strong criticism of capitalism and mass public manipulation at the hands of politicians and the media.

Could you tell us more about your background? My background is atypical. I was lucky enough to be raised in a family that valued love and thought in all its forms of expression: philosophical, scientific, and artistic. I was a bright student, but I was reluctant to follow the rules of a school that I found uninteresting and outdated. I loved to read and create. I considered that I had more to learn from Homer, Plotinus, Horace, and Shakespeare than I did from this school. The classes Préparatoires aux Grandes Ecoles proved me wrong. Two teachers there changed my life. They pushed me to examine my thoughts and gave me the keys to express them. From that moment on, I wrote with more regularity. Discover more details on Jean Arno poetry.

The game is worth the candle: new fragments appear when one manages to elucidate the mystery: “Every soul that darkness stirs up digs the world with such a stubbornness that chasms blossom with stars of unknown splendor.” When it is not the pleasure of the “game” or the Orphic enigma which carries away the heart of the reader, it is the philosophical accuracy of the subject (“In our reasons murmur/Mysteriously/the eloquent speeches/of our obscure passions”) and the symbolic and Parnassian beauty of the tamed verse: “In her eyes of sapphire / Full of light and clarity / Desires lose themselves / In avid immensity).” When one loves great literature and philosophy, one can only be conquered by this monument of splendor.